CLEARANCE! Mortex downflow A-coil. Replaces indoor coils for 1.5 & 2.0 ton R22 or R410A systems. Shipped with a size 59 piston which is perfect for 2-ton 13 seer R22 units. For use with 10, 12 & 13 seer R22 units including heat pumps with the proper piston. Refer to your owner's manual or contact us for the correct piston size. Charged with nitrogen. Shipped with quick connect fittings, but those can be cut off if sweating is preferred. Quick connect screw-on fittings. Thread size on the quick connects are 3/8" and 7/8". Nominal sweat sizes are 1/4" and 5/8" (or 3/8" x 3/4" OD) if the quick connects are cut off. A-coil size is 19 5/8" long X 18" wide X 16" tall. Always double check the dimensions of your coil cabinet before ordering. Includes a plastic drip pan with 3/4" drain connection. R-22 coils are quickly being phased out for newer R-410A equipment. If you feel you will soon need to replace your a-coil, order now while they are still available. If your a/c technician tells you that the coils are no longer available, call your technician back and tell them you found a source. These uncased high-efficiency coils are designed to be installed in new and existing downflow furnaces. Fits Mortex, Nordyne, Intertherm, Miller, Evcon, Coleman, Red T, Vexar, Airpro and other brands. Leak tested to 500 psi and factory sealed with nitrogen. Rated for use with most outdoor units. 1 year replacement warranty. Limited to stock on hand.