901621 Nordyne MGH blower motor 1/5hp angle mount

This is a new substitute for the original Nordyne 1/12hp motor which is no longer available. 1/5hp 1-speed 115V blower motor. Rotation is counter clockwise when looking from the back of the motor (CCWLE). 1050 RPM, 4.0 amps, shaft size is 1/2" x 5.5" (longer than the original, but that's OK), housing is 5" diameter x 4.0 long". 2 black wires, no run cap required. Angled 3-leg mounting bracket. If flat mounting is required, use motor 901374. Used on the following heat-only furnaces built after July of 1985: MGH-045, MGB-045, MAC-1145, MGH-055, MGB-055 & MAC-1155.

Replaces 620866, 6208660 & 620-8660. For units with a/c, look at motor # 620699.