{"product_id":"icm870-9a-motor-starter-soft-start","title":"ICM870-9A MOTOR STARTER soft start","description":"\u003cp\u003e\u003cstrong\u003ehe ICM870 series soft starts ARE compatible\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ewith 2-stage HVAC units. If your 2-stage unit has two compressors, you will need two ICM870 units.\u003c\/p\u003e\n\u003cp\u003eThe ICM870 Soft Start is intended for residential, commercial, RV \u0026amp; marine applications. The ICM870 integrates compressor or motor in-rush current over startup time, thus reducing peak current demand on a power supply source by up to 70%.\u003c\/p\u003e\n\u003cp\u003eEffectively reducing power draw to the A\/C, the ICM870 utilizes a built-in self learning algorithm to deliver the optimal in-rush current per application. The ICM870 will monitor system health including voltage, current, compressor startup and integrity. Upon a fault condition, it will halt operation and initiate a 4 minute anti-short cycle routine while providing diagnostic fault information by means of an LED indicator.\u003c\/p\u003e\n\u003ch4\u003eNOTE:\u003c\/h4\u003e\n\u003cp\u003eThe ICM870 Series Soft Starts are NOT recommended to be used with air conditioners or heat pumps which have control boards that sense compressor current and perform a lock out for fault conditions.\u003c\/p\u003e\n\u003ch5\u003eAny Air Conditioner or Heat Pump which has a Comfort Alert control board or an Emerson Core Sense Module installed are not directly compatible for use with the ICM870 Series Soft Start.\u003c\/h5\u003e\n\u003cp\u003eThe \u003cb\u003eEmerson CoreSense\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003emodule can be bypassed when using the ICM870 Series Soft Starts. Unfortunately, the circuit board and kit style Comfort Alert cannot be bypassed and therefore, ICM870 cannot be used.\u003c\/p\u003e\n\u003ch4\u003eExamples of a Control that can be Bypassed:\u003c\/h4\u003e\n\u003ch3 class=\"p2\"\u003e\u003cb\u003eFeatures \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces in-rush current\/draw necessary at startup by up to 70%\u003c\/li\u003e\n\u003cli\u003eProlong the life of the A\/C by reducing excessive torque, wear and tear\u003c\/li\u003e\n\u003cli\u003eBuilt-in dynamic start delay\u003c\/li\u003e\n\u003cli\u003eReduce loud noises, light flickering, and breaker trips\u003c\/li\u003e\n\u003cli\u003eBuilt-in self-learning algorithm\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOver-current protection\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOver\/under voltage monitoring\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in start capacitor\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLED fault indicators\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eUltrasonic sealed tamper-proof enclosure\u003c\/li\u003e\n\u003cli\u003eInstallation hardware is included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWhich Model Do I Need?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eRefer to your service panel or user manual to determine your actual RLA rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eICM870-9A:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFor use with a Compressor Load Amp Rating (RLA) of up to Maximum of 9A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eICM870-16A:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor use with a Compressor Load Amp Rating (RLA) of 9.1-16A Maximum\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eICM870-32A:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor use with a Compressor Load Amp Rating (RLA) of 16.1-32A Maximum\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease DO NOT assume it is acceptable to upsize the ICM870-9A or ICM870-16A to the largest size (ICM870-32A) when you are unsure of the RLA current or when the current is close to the limit of the ICM870-16A. This practice will defeat the benefit of the Inrush reduction on smaller systems under 16 Amps and defeat the over current safety limit by allowing for a 20A trip point for over current on the ICM870-32A compared to an 11.25A trip point on the ICM870-16A. PLEASE choose the ICM870 based on RLA or by using the size vs tonnage chart shown.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"5\" width=\"336\"\u003e\u003cstrong\u003eAir Conditioning \u0026amp; Heat Pump Loads – Average (for reference only)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"72\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"66\"\u003e\u003cstrong\u003eBTU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"54\"\u003e\u003cstrong\u003e*RLA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"108\"\u003e\u003cstrong\u003eICM870-model\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"72\"\u003e1 Ton\u003c\/td\u003e\n\u003ctd width=\"66\"\u003e12,000\u003c\/td\u003e\n\u003ctd width=\"54\"\u003e6\u003c\/td\u003e\n\u003ctd width=\"108\"\u003eICM870-9A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"72\"\u003e2 Ton\u003c\/td\u003e\n\u003ctd width=\"66\"\u003e24,000\u003c\/td\u003e\n\u003ctd width=\"54\"\u003e12\u003c\/td\u003e\n\u003ctd width=\"108\"\u003eICM870-16A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"72\"\u003e3 Ton\u003c\/td\u003e\n\u003ctd width=\"66\"\u003e36,000\u003c\/td\u003e\n\u003ctd width=\"54\"\u003e16\u003c\/td\u003e\n\u003ctd width=\"108\"\u003eICM870-16A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"72\"\u003e4 Ton\u003c\/td\u003e\n\u003ctd width=\"66\"\u003e48,000\u003c\/td\u003e\n\u003ctd width=\"54\"\u003e22\u003c\/td\u003e\n\u003ctd width=\"108\"\u003e\u003ca href=\"https:\/\/icmcontrols.com\/product\/icm870-32a\/\"\u003eICM870-32A\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"72\"\u003e5 Ton\u003c\/td\u003e\n\u003ctd width=\"66\"\u003e60,000\u003c\/td\u003e\n\u003ctd width=\"54\"\u003e26\u003c\/td\u003e\n\u003ctd width=\"108\"\u003e\u003ca href=\"https:\/\/icmcontrols.com\/product\/icm870-32a\/\"\u003eICM870-32A\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"72\"\u003e6 Ton\u003c\/td\u003e\n\u003ctd width=\"66\"\u003e72,000\u003c\/td\u003e\n\u003ctd width=\"54\"\u003e32\u003c\/td\u003e\n\u003ctd width=\"108\"\u003e\u003ca href=\"https:\/\/icmcontrols.com\/product\/icm870-32a\/\"\u003eICM870-32A\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e*This chart is intended as a quick reference only. It reflects the average Single-Phase Air Conditioning and Heat Pump conversions of Tonnage, BTU’s, and RLA. Please refer to your service panel or user manual to \u003cem\u003e\u003cstrong\u003edetermine your equipment’s actual RLA rating\u003c\/strong\u003e\u003c\/em\u003e before deciding which model ICM870 you need.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCoreSense Diagnostic\u003c\/p\u003e","brand":"Neuco","offers":[{"title":"Default Title","offer_id":42398238834754,"sku":"ICM870-9A","price":269.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1071\/8320\/files\/ICM870-16A_2024_c_web-600x527.png?v=1755567985","url":"https:\/\/hvacpartstore.com\/products\/icm870-9a-motor-starter-soft-start","provider":"HVACpartstore","version":"1.0","type":"link"}