922133A Nordyne Compressor Copeland, CR24K6E-PFV-925

Must be shipped Via Freight truck 

Description

The 922133A is an OEM hermetic reciprocating compressor supplied under Nordyne part number. It’s built around the Copeland CR24K6E-PFV-925 platform, providing reliable 24,000 BTU/h cooling capacity for residential split-system and packaged units. The compressor runs on 200/230 VAC single-phase power at 50/60 Hz and is factory-charged for R22 refrigerant. Designed with stub suction and discharge connections, a square-mount base, integrated thermal overload protection, and anti-vibration mounting pads for quiet, long-life operation.

Compatibility

This compressor is a direct replacement for Nordyne part 922133 and fits any Nordyne system calling for a 2-ton, R22, 200/230 V, 1 Ph reciprocating compressor. Typical applications include:

• Split-system condensing units rated 24,000 BTU/h, R22, 200/230 VAC, single-phase

• Rooftop or packaged heat pump units requiring a 2 ton R22 compressor

• Any Nordyne model originally specifying Copeland CR24-series compressors

Always verify the outdoor unit’s data plate to confirm voltage, phase, capacity, and refrigerant type before ordering.

Installation & Service Tips

• Align the compressor’s square-mount base and motor shaft orientation with the OEM bracket; replace worn vibration isolators.

• Evacuate to at least 500 microns and confirm a deep, moisture-free vacuum before charging with R22.

• Install a new liquid-line filter drier downstream to trap moisture and debris.

• Torque suction and discharge flare nuts to manufacturer specs (typically 14–18 ft·lb) to prevent leaks.

• Use a calibrated manifold gauge set to adjust superheat and subcooling per Nordyne guidelines.

Cross-Reference & Resources

• OEM replacement mapping: 922133 → 922133A

• Copeland cross-reference: CR24K6E-PFV-925 → Nordyne 922133A

• Key service manual sections: compressor startup, system evacuation, vibration isolation