RBW10207 Coleman OEM 10-5/8 x 8-1/6 x 1/2 CCW Steel Blower Wheel S1-026-32627-700
RBW10207 Coleman OEM 10-5/8 x 8-1/6 x 1/2 CCW Steel Blower Wheel S1-026-32627-700
The RBW10207 Coleman OEM Blower Wheel is a heavy-duty galvanized steel double-inlet blower wheel designed for use in select Coleman, York, and Luxaire furnace applications. Commonly referred to as a 10 x 8 blower wheel, the actual dimensions are 10-5/8" diameter x 8-1/6" width with a 1/2" center bore. This wheel features counterclockwise (CCW) rotation when viewed from the motor shaft end and is engineered to provide proper airflow, static pressure, and furnace performance. Manufactured from durable galvanized steel for long service life in demanding HVAC applications.
Cross‑Reference
- RBW10207
- S1-026-32627-700
- S1-02632627700
- 026-32627-700
- 026-32627-000
- 026-23892-000
- 026-21211-000
- 026-21211-700
- 6313-2601
- 3400-3611
- 1472-283
- 1472-2831
- Packard L01332402
- Lau 01332402
- DD10-8A
- Revcor 10207
Direct OEM
Yes, OEM Coleman / York replacement blower wheel.
Compatible Brands
- Coleman
- York
- Luxaire
- Fraser-Johnston
Verify model and serial number compatibility before ordering.
Application
- Residential Gas Furnaces
- Mobile Home Furnaces
- Downflow Furnaces
- Upflow Furnaces
- HVAC Air Moving Systems
Specifications
- Diameter: 10-5/8"
- Width: 8-1/6"
- Bore Size: 1/2"
- Rotation: CCW (Counterclockwise)
- Construction: Galvanized Steel
- Design: Convex Double-Inlet Blower Wheel
Related Components
- Blower Motors
- Motor Mount Brackets
- Blower Housings
- Run Capacitors
- Fan Relays
- Bearings
- Set Screws
- Control Boards
- Fan Limit Controls
Technician Notes
- Commonly identified as a "10 x 8" blower wheel, though actual dimensions differ.
- Rotation is determined when viewing the wheel from the motor shaft end.
- Inspect blower housing for damage and debris before installation.
- Verify motor shaft condition and diameter before replacing the wheel.
- Replace bent or unbalanced wheels immediately to prevent motor damage and vibration.
Common Symptoms of Failure
- Excessive blower vibration
- Scraping or rubbing noises
- Reduced airflow
- Furnace overheating
- High-limit switch trips
- Blower wheel imbalance
- Cracked hub or damaged fins
- Increased motor amp draw
- Poor heating performance
Installation Tips
- Disconnect furnace power.
- Remove blower assembly from cabinet.
- Loosen hub set screw and remove damaged wheel.
- Clean blower housing thoroughly.
- Verify shaft diameter and wheel orientation.
- Install replacement wheel and center within housing.
- Tighten set screw securely on shaft flat.
- Check for free rotation before startup.
- Verify proper airflow and motor amperage after installation.
Recommended Inspection Items
- Blower Motor Bearings
- Run Capacitor
- Motor Mounts
- Blower Housing
- Fan Relay
- Air Filter
- Heat Exchanger
- Wiring Connections
- Motor Shaft Wear
- Set Screw Security
Galvanized steel convex double-inlet blower wheel commonly referred to as a 10 x 8. Actually measurements are 10-5/8" diameter x 8-1/6" width. 1/2" center bore. Counterclockwise rotation when viewing from the shaft end of the motor. Picture may not be of actual wheel.
Replaces 6313-2601, 3400-3611, 1472-283, 1472-2831, 026-23892-000, 026-21211-000, 026-21211-700, 026-32627-000, S1-02632627700 & 026-32627-700.
Also known as Packard L01332402, RBW10207, Lau 01332402, DD10-8A and Revcor 10207.
